Tag: fluid dynamics

Wild Gray Seals Clap Back

Here’s a paper that cries out for fluid dynamical/acoustical follow-up: wild gray seals have been observed signaling underwater by clapping their forefins. As you can hear in the video, the sound is quite loud and carries well underwater. The biologists who observed the behavior postulate that it’s used by males during breeding season to ward one another off and to signal strength to nearby females.
Although many species (including humans) slap against the water surface to generate noise, we don’t know of other species producing such a loud clap entirely underwater. The clap resembles the motions used by seals for propulsion, though the results are obviously quite different. I know plenty of researchers already looking into seal propulsion — here’s your future work! (Image and video credit: B. Burville; research credit: D. Hocking et al.; via Gizmodo)
February 5, 2020
Collective Catfish Convection
Gather many birds, fish, or humans together and you often get collective motion that’s remarkably fluid-like in appearance. This video shows a group of juvenile striped eel catfish, an (eventually) venomous species that uses strength in numbers for protection while young. Their movement is rather mesmerizing, and if you watch individual catfish, you’ll see a sort of convective motion inside the blob. There’s a general downward trend near the front of the school and a rising one on the backside. Perhaps they’re taking turns feeding near the bottom of the pack? (Image and video credit: Abyss Dive Center; via Colossal)
February 4, 2020
Coalescence in Heavy Metal Droplets
When a drop of water falls into a pool, it doesn’t always coalesce immediately. Instead, it can go through a coalescence cascade in which the drop partially coalesces, a daughter drop bounces off the surface, settles, and itself partially coalesces. We’ve seen this many times before, but today’s video shows something a little different: here the drop and pool in question are made of a gallium alloy immersed in a background of sodium hydroxide. This means that the drop has very high surface tension (and density) but does not form an oxidation layer on its surface that could inhibit coalescence. And just like the water droplet, the gallium alloy undergoes a series of partial coalescences.
There’s one key difference, though. Did you notice that the water droplets bounce higher as the drops get smaller, but the gallium droplets do the opposite? Previous research suggested that the droplet rebound height is driven by capillary forces, but the high surface tension of both of these liquids means that capillary forces should be large for both of them. Perhaps there’s much more viscous drag in the gallium and sodium hydroxide case? (Image, video, and research credit: R. McGuan et al.)
February 3, 2020
“Otherworld, Vol. 1”
Roman De Giuli’s “Otherworld, Volume 1” is a beautiful exploration of color and flow. Glittery particulates act as tracers in the flow, reminiscent of the way rheoscopic fluids do. In many sequences, the glitter lends a sense of texture to the flow. Without context, I cannot say whether those are true flow features, but they certainly remind me of instabilities like Tollmien-Schlichting waves. (Image and video credit: R. De Giuli)
January 31, 2020
Holding Fast in the Flow
Many tiny creatures in the natural world face living in fast flows. The larvae of the net-winged midge, for example, forage their way through fast-flowing Alpine springs with speeds of 3 m/s or more. You or I would find standing in such water a challenge, but these larvae are unbothered, thanks to the clever suction-cup-like appendages that help anchor them to rough rocks.
The larvae generate their strong attachment with an outer rim flexible enough to conform to uneven surfaces. When they activate the central piston of the suction cup, this creates a seal strong enough to withstand forces up to 600 times the larvae’s body weight. But holding on to one spot forever is hardly useful, so the larvae also have a V-shaped notch in the cup controlled by dedicated muscles. When activated, this quickly breaks the seal, allowing the larvae to relocate. (Image and research credit: V. Kang et al.; via The Engineer; submitted by Marc A.)
January 30, 2020
Superwalking Droplets
Vibrate a pool of silicone oil and you can generate walking droplets. Drive the vibration at two simultaneous frequencies and you can support much larger droplets, known as superwalkers. These superwalkers have their own intriguing dynamics, a few of which are featured in this video.
Superwalkers can create promenading pairs, chase one another, orbit, and even form ordered and disordered crystals. They can even generate stop-and-go traffic patterns. As with regular walkers, these complex behaviors come from the interaction of bouncing droplets with their ripples and those of their neighbors. (Image, video, and research credit: R. Valani et al.)
January 29, 2020
Morphing Wings Using Real Feathers
Although humanity has long been inspired by bird flight, most of our flying machines are nothing like birds. Engineers have struggled to recreate the ease with which birds are able to morph their wings’ characteristics as they change from one shape to another. Now researchers have built a biohybrid robot, PigeonBot, that uses actual pigeon feathers as part of its morphing design.
Many species of birds, including pigeons, have Velcro-like hooks in the microstructure of their feathers. These hooks help the flight feathers stick to one another and create a continuous wing surface that air cannot easily slip through, even as the wing drastically changes shape. By using actual feathers, PigeonBot shares this advantage.
PigeonBot also has a somewhat minimalist design in its articulation, using only a wrist and finger joint in each wing to control shape. The feathers are connected through an elastic ligament, which — along with their microstructure — allows them to smoothly change shape under aerodynamic loads. The end result is a remarkably capable and agile biorobot researchers can use to better understand how birds control their flight. (Image and research credit: L. Matloff et al. and E. Chang et al.; via NPR and Gizmodo)
January 28, 2020
Breaking the Euler Equations
Mathematicians like to break things. Or, more exactly, they like to know when the equations we use to describe physics break down. One popular target in fluid mechanics are the Euler equations, which describe the motion of frictionless, incompressible flows. Mathematicians have been on the hunt for centuries for situations where these equations predict singularities, points where the velocity or vorticity of a fluid change infinitely quickly. Since that can’t happen in reality (at least as far as we understand it), these singularities indicate weaknesses in our mathematical description and may help uncover fundamental flaws in our understanding.
Despite centuries of effort, the Euler equations withstood mathematical assault… until recently. Since 2013, a series of mathematicians have been successfully chipping away at the Euler equations’ seeming perfection with a series of scenarios that seem to lead to singularities. One is similar to stirring a cup of tea, except that you stir the upper part of the cup in one direction and the bottom half in the opposite. As the flow develops, a singularity occurs where the secondary flows of these two stirring motions collide. For more, check out these two articles over at Quanta. (Image credit: L. Fotios; see also Quanta Magazine 1, 2)
January 27, 2020
When the Mediterranean Dried Up
Geological evidence shows that millions of years ago, the Mediterranean Sea nearly dried out. In fluid mechanics, we’d describe this problem using one of our fundamental equations: conservation of mass, also known as continuity.
Imagine a volume containing the entire Mediterranean. To describe the amount of sea water in that volume, you need to keep track of two major quantities: how much water is flowing into the volume and how much is leaving it. For the prehistoric (as well as today’s) Mediterranean, the sources feeding the sea are 1) an inflow from the Atlantic through the Strait of Gibraltar; 2) inflows from rivers; and 3) rainfall. Water is lost primarily to evaporation.
As explained in the video, the Mediterranean’s dry spell was heralded by tectonic changes that sealed the Strait of Gibraltar, depriving it of its largest source of inflow. At the same time, warmer temperatures and less rainfall reduced influx from rivers and the atmosphere while increasing evaporation rates. The result? Water levels in the Mediterranean dropped by hundreds of meters, creating massive salt deposits, wiping out native marine life, and allowing mass migration by land-dwelling animals. Eventually, though, the Strait re-opened, creating what might have been a massive flood. (Video and image credits: PBS Eons)
January 24, 2020
Captured by Waves
Acoustic levitation and optical tweezers both use waves — of sound and light, respectively — to trap and control particles. Water waves also have the power to move and capture objects, as shown in this award-winning poster from the 2019 Gallery of Fluid Motion. The central image shows a submerged disk, its position controlled by the arc-shaped wavemaker at work on the water’s surface. The complicated pattern of reflection and refraction of the waves we see on the surface draws the disk to a focal point and holds it there.
On the bottom right, a composite image shows the same effect in action on a submerged triangular disk driven by a straight wavemaker. As the waves pass over the object, they’re refracted, and that change in wave motion creates a flow that pulls the object along until it settles at the wave’s focus. (Image and research credit: A. Sherif and L. Ristroph)
January 23, 2020